If you have low water pressure from your well system that’s a bad thing because you can’t get the desired amount of water from the well for your house. If that’s a recurring problem, you must figure out what’s wrong yourself or hire a well pump service. Here are some possible things that can go wrong.

Check For Leaks

One of the most common causes of low water pressure from water well systems is leaks in the pipes bringing water up from the well and to the house for use. These pipes work on a certain pressure. However, because of leaks, the pressure can bleed out and air can get trapped in the pipes.

This can cause the water to come from the pipes, either with air or with an inconsistent and low pressure. This is a really common problem and it can occur in well systems that are too old and the pipes haven’t been replaced in a long time.

Check the water pressure from the faucets and if there is inconsistency in the pressure, then change the pipes immediately and you will see the difference for yourself. It’s an easy fix, but it is important, so don’t take it too lightly, because it can affect the water supply in the house.

Is There Water Wastage?

Another thing that can lead to low pressure in the water well system is water wastage. This can be because of leaks or there might be other faucets that are left open and that’s causing the water to come out slowly from the taps that you normally use.

This is common to occur and the best way to go about this issue is to ensure that you check all the faucets and double-check that no running faucet can lead to low pressure in the rest of the house. Once you know the problem, just screw off the tap and you’ll see the difference.

Check The Shower Head

Sometimes, there might be low pressure in the shower bathrooms. This is common because shower heads have very small nozzles that can get clogged, especially if the water coming from the well is sandy and has a lot of debris in it.

What you want to do is check the shower head. It’s usually pretty easy to dismantle and you can clean the shower head if there is a lot of accumulation of sand particles in it. Once that’s done, you can screw the head back on and test the water out. 9 times out of 10, if the water pressure is fine from the back of the well, then the shower head will work properly.

Clean The Faucets

This one ties in with the previous tip. Just like the shower heads, the faucets can also be in dire need of a cleanup and you need to clean the small crevices and loops to ensure that there isn’t any obstruction in it.

This can cause the water pressure to become low and you don’t want that. Check the faucets and give them a good scrub from the inside and then you’ll see the water pressure get back to normal.

Inspect The Electrical Connections

Voltage tripping and other electrical issues can also lead to problems in the pressure of the water well system. If you live in an area where frequent voltage issues are the norm, then you need to get it checked, because this might cause the pump to not work properly and that can lead to lower pressure, ultimately.

If you want a permanent fix to the solution, then contact your local electricity supply company or get a stabilizer for the well pump, as it will stabilize the voltage coming from the supply and you’ll be able to get water with adequate pressure.

Replace The Filters

If you use water filters in combination with your well pump because there’s sediment in the water, then this can also lead to low water pressure. The filters can only work for so long and you need to replace them timely if you want zero pressure-related problems in your house. This is why you must change the filters now and then.

The more sediments the water has, the more frequently you’ll need to change the filter. You will see for yourself how amazingly the water well system performs if you keep things up to date.

Is The Well Pump Clogged?

This is a problem with very old pumps or inadequate pump selection for your well. You need to get a pump that’s suited for your well and that’s crucial. Sometimes, the pump is unable to pump water from a deep well to the surface and that can cause low pressure of water. In that case, you should consider well pump replacement Loudoun County.

Other times, there might also be clogging issues in the pump and that happens when the water has a lot of sediments and you’re not using a filter to get rid of it. The sediments will accumulate over time and clog the pump, leading to inefficient performance.

There Might Be Corrosion

Pipes can also suffer from corrosion and this can cause their diameter to shrink. You know what that means. Water will have a very hard time trying to push itself through a corroded pipe, as opposed to a pipe that’s brand new and has zero obstructions. This can also cause the water to have a weird metallic taste and smell and it’s off-putting.

So, if your pipes are a little worse for wear, then you need to get them replaced before it’s too late. The right and non-corroded pipe will work like magic.

The Valve Is Stuck

There are valves known as gate and ball valves. These need to be opened and closed periodically to prevent getting stuck. Well, if you don’t open and close the valves frequently, then this can cause them to seize and then it can lead to a pressure problem in the water.

This is why you need to release the valve first, let the pressure get to normal, and then you have to take care that the valves are opened and closed from time to time. This will ensure smooth running of the pump and well system and nothing will get overheated.

The Pressure Regulator Is Faulty

Pressure regulators are great and all, and they’re usually attached to the main pipe to tell you the pressure at which the water is coming. However, they’re not indestructible. These pressure regulators can break down and can show faulty readings. So, even though the pressure regulator will show adequate pressure, the pressure in your faucets and the rest of the house will show something entirely different.

The best thing to do in this case? Change the regulator and then see the values. This is quite normal and you can change the regulator and go about your life, like normal.

Conclusion

Low water pressure in wells can be frustrating, but you can get rid of the problem if you catch it in time. Luckily, these tips will help you out. Get in touch with a well pump repair WV company so they inspect everything and suggest the right repairs or replacement for fixing water pressure problems.