Troubleshooting Gas Oven Problems

Your gas oven not working the way it is supposed to can be a frustrating problem. And since there is no alternative to a gas oven in the kitchen, you will need to get it fixed by an appliance repair technician as soon as possible. We are going to share some common gas oven problems along with troubleshooting tips for you to get your oven running in no time. Let’s begin!

The Gas Stove Won’t Light

A common problem is that the gas stove won’t simply light. If the gas stove does not turn on with the electric ignition, you can try lighting the burners with a match. But even if that does not solve the issue, you will need to go a bit deeper.

Lift off the burner grate, burner base, and burner cap. Check and clean the area. Sometimes, these factors can clog the burners, preventing the escape of gas. At the same time, check for any loose connections, especially the wires connecting the igniter to the control module.

Once you are done cleaning and checking the connections, try turning on the burner, if the problem persists, it means the igniter may need to be changed.

The Oven Is Not Heating

An oven that is not heating is usually a result of a faulty igniter or heating element. The good news is that you can replace the heating element or igniter by yourself or get it done by an oven repairer. Make sure that you turn off the power and wear safety gloves.

To remove the heating element, you can use a screwdriver. Heating elements and the igniter are usually located inside the oven. To access the igniter, remove the storage drawer or broiler. If you are still not able to access the heating element, you will need to consult a professional.

Oven Not Heating To The Right Temperature

If you observe that your oven doesn’t reach the set temperature, the problem could be with the temperature sensor or the heating element. To check the temperature sensor, make sure the sensor is not getting in contact with any wall of the oven. You will need to use an ohmmeter to ensure the sensor is functional.

As the temperature rises, the resistance should rise as well. So, if the ohmmeter shows that the sensor is not working, you will need to replace it.

On the other hand, if your oven still does not heat, you will need to replace the gas igniter. And once you are done replacing everything, recalibrate the oven.

The Oven Door Won’t Shut

As your oven turns old, it will begin developing problems like the oven door not shutting properly. In this case, you will most probably need to replace the hinges. Again, you can do this by yourself by simply removing the door. Furthermore, you should also check for broken door springs. Open or remove the bottom drawer and look under it to find the door springs.

In addition to that, check the oven door gasket as well. More than the hinges, it is the gasket that needs to be replaced in most cases. If the gasket is damaged or has cracks, you will surely need to replace it. And if none of these solve the issue, the door sensor may need replacement.

Spark Modules Continue To Spark After The Gas Is Ignited

If you notice that the burner continues sparking after the gas has been lit, it means there is a shortage in the spark module. In most cases, this is due to some liquid getting into the spark module. Fortunately, there is an easy fix for this. Simply turn off the oven and let it dry out. Or you can use a hairdryer or air blower to dry the liquid.

Then, try turning on the stove to see if it works. If the module continues to spark, you will need to get it replaced by a technician.

Final Word

In the end, troubleshooting gas oven problems can be both tricky and simple at the same time. If you are not able to get your gas oven running back again, you will need an oven repair Alexandria expert to fix the issue. However, you should keep the tips mentioned above to at least be aware of the problem you are facing.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top