Online Review Management Systems – Why You Should Consider One for Your Business?

Online reviews are established as primary trusted source for ratings and recommendations by consumers for services, businesses, and products as a whole. Consumer surveys found that ninety-seven percent of the consumers looked up local businesses over the internet and most of them were more likely to rely on local businesses because of positive reviews. It means that this is important that reviews generated online for the brand are both positive and real reflection of what products and services you need to offer. While it is recommended that brands respond and monitor to each single consumer review, having online review management systems may automate the whole process, which makes a no-hassle funnel of the positive review promotion.

An Overview of Online Review Management Systems

Online review management systems are a good way to redirect, monitor, and respond to the online reviews as they’re uploaded to different review websites and forums. This kind of system provides you the ability to enable positive reviews to be posted on a regular basis to different online platforms while redirecting the negative reviews to the customer service representative so they may be addressed directly. Through using automated email systems, on-site widgets, retargeting or online review website crawlers, online review management systems may make funnels for reviews that moderates what’s published over the internet and what’s redirected.

Why Should You Consider Online Review Management Systems?

There are various reasons why you should use an online review management system and these include the following:

  • Your brand has some positive reviews on a particular website and doesn’t have any on some websites.
  • The positive reviews are getting overlooked for irrelevant, outdated or fake negative reviews.
  • You resolved and responded to the concerns that were in negative reviews, but customers didn’t take that down or update them.

Those are just some of the many reasons why you might need to consider an online review management system. Majority of online reviews are made by customers who have highly polarized experiences. These can be either bad or good. Nevertheless, customers leave negative reviews than positive ones. It means that customers who had neutral or positive experiences may have reviews overshadowed by the negative ones. A good way to combat such online negative reviews is through responding to the review and address the concern.

Having the best review management software in place would enable you to get alerts for new online comments or reviews in one location. Majority of systems feature a dashboard online that may automate the process of filtering review, may redirect negative reviews, respond, and monitor the incoming reviews and establish a positive online reputation. Depending on your chosen system, the setup may range in difficulty that is based on your personal experience with email automation and web development. Having a company that serves as the mediator for you as well as the system will ensure that all guesswork is taken care of. With this, you may focus on your brand awareness offline without the need to worry about your brand reputation online.

Deep Fryer Repair: 5 Deep Fryer Maintenance Tips

As a restaurant owner, it’s your responsibility to keep your deep fryer in good condition. There are plenty of ways in which you can make it possible. Some of these ways as given by deep fryer repair professionals include:

Keep it clean

Everything begins here. There is no way you are going to keep your deep fryer in top condition when it’s dirty. When you allow a lot of grease to buildup in your appliance, it becomes a fire hazard.

A dirty deep fryer also tends to be unhygienic. For your kitchen to be hygienic and keep fires away, you need to ensure that your deep fryer is clean all the time. This calls for you to wipe down the exterior of the deep fryer after every shift, or at least once every day.

At the end of every day, send fry baskets through the dishwasher. This is to clean them. You should let the baskets dry out completely before you put them back.

At least once every six months, deep clean the deep fryer. For ideal results, ensure that you follow the manufacturer instructions for a “bail-out”.

Replace the oil regularly

The deep fryer can’t fry without oil. Unfortunately, when you allow the oil to stand for a long time, you tend to give the food an unpleasant taste. The old oil also tends to cause the food products to brown faster as they don’t cook as well as they are supposed to.

For example, French fries tend to look brown, but they are still soggy.

For you to avoid this, you should replace the oil regularly. The frequency at which you do it depends on how you use your commercial deep fryer. For you to tell the right time you should replace the oil you should cook a certain food item twice a day for a few days while tasting it.

When you notice a change in taste, that’s the time when you should replace the oil. When you are changing the oil, remember to do it when it’s cool so that it can be safe to handle. The best time to do it in the morning, before the first shift.

If you have a small restaurant you should replace the oil by yourself, but if the restaurant is large and you can’t do it, you should appoint a dedicated person to help you out.

Some restaurant owners have problems discarding the oil as they deem it as wastage. Remember that old oil translates to bad food and an awful restaurant. So, for you to maintain the great reputation of your restaurant, don’t shy away from discarding the oil when the time is right.

Keep an eye on the oil temperature

The temperature that you run the deep fryer on not only determines the quality of food that you will get, it also determines the working of the machine. For you to avoid running the machine too hot or too cold you should regularly check the temperature.

The oil that you are using tends to change the temperature; therefore, you should always calibrate your machine whenever you change the oil.

Clean and change the filter

The role of the filter is to trap food debris from the oil which aids in keeping the oil clean and usable for a long time. For you to have clean oil, it’s recommended that you filter the oil at least twice a day.

Many people simply use the oil filter and fail to take good care of it. You should note that oil filters need to be changed regularly. The steps of changing them depend on the manufacturer. For you to have an easy time doing it, always follow the instructions given by the deep fryer manufacturer.

Safety should be your first priority

As mentioned above, grease poses a great danger to you and your property; therefore, you should be cautious when handling the deep fryer. As rule of thumb, ensure that you educate the people that will be handling the machine so that they don’t create a mess.

Commercial appliance repairs Springfield professionals recommend that you equip your deep fryer with a temperature-limiting device that will shut off the fuel or energy in the event the cooling oil exceeds a certain temperature.

5 Tips For A Safe And Successful Crane Rigging

When you are undertaking crane rigging you need to be cautious as you can easily hurt yourself and others on the site. You can also easily damage the crane leading to you incurring heavy loses as you have to fix the crane. The cool thing is that there are plenty of things you can do to be safe. Some of these things include:

Hire the right machine

Everything begins here. There is no way you are going to have a safe rigging project if you have the wrong machine. If this is the first time you are renting a crane you should know that there are plenty of cranes in the market that you can go for. The cranes come in different sizes and are ideal for different applications.

Before you head to the stores to rent the machine, first ask a professional to visit your site and inspect it. After this, he/she will let you know the right machine that is ideal for your application.

In addition to the crane, you also need to pay attention to the slings and hardware. Every load has a different rigging and safety requirements, and different hardware has different capacities for size and weight.

Just like with the crane, you should ask a professional to help you in identifying the right hardware for your application. As rule of thumb, ensure that the rigging equipment is of high quality and in good condition. The last thing you want is the sling breaking when you are lifting the load.

Handle and take good care of the equipment

Renting the right crane and sling equipment isn’t enough—you also need to take good care of it. Every day, before you undertake the rigging, you should inspect the machine and the slinging equipment and confirm that they are in good shape.

If you notice a problem, regardless of how minor, you should fix it immediately. Once you are done with the day, you should clean off the sling and machine. You should note that if you fail to clean the equipment, it will rust and within a short time, it will stop working.

In addition to cleaning, you also need to lubricate it in order to ensure optimum performance.

Operate the machine properly

You will rent the right crane, maintain it properly, but if you don’t operate it properly, it’s bound to develop problems.

For optimum safety and peace of mind, ensure that the machine you are using is operated by a qualified and experienced rigging expert. The good thing is that most companies will supply you with a crane operator when you rent a crane.

If you have to hire the operator by yourself, you should take caution and ensure that you hire the right one. as rule of thumb, ensure that he/she is experienced. He/she should also be certified to work in your local area.

In addition to the crane operator, you also need to hire the right assistant. This is the person who will direct the operator during the lifting. The rule of thumb is to ensure that the assistant is highly experienced with hand signaling and can effectively communicate with the operator.

Pay attention to the load weights

Plenty of accidents and property damages have been reported as the crane tips over or the weight falls. This is because the crane operators lift more than the crane can handle.

When you are hiring the crane, you should get to know the maximum weight that the crane can carry. As rule of thumb, never lift the weight that is more than the crane can handle.

Work with properly maintained cranes

As mentioned above, the success of your rigging project begins with the type of crane that you hire. Ensure that the crane rental services DC takes good care of its machines. The last thing you want is the machine grinding to a halt in the middle of your project.

When hiring, ask to see the maintenance records. For your project to always be in progress, you should hire the cranes from a company with plenty of machines. This way you have peace of mind that in the event one of the machines stops working, you can easily get a replacement.

Reasons Why You Should Install Car Bodywork Protection Film

As a car owner, you need to protect your car. One of the ways of doing it is by installing a car bodywork protection film.

Why should you install the car bodywork film?

There are plenty of reasons why you should install the film. Some of these reasons include:

Protection from abrasion: Abrasion comes about in the form of micro-marring. When the abrasions are on the car paint, they are visible, depending on their size. When you install a film on your car, you prevent your car from abrasions hence your car looks whole for a long time.

Prevention from browning: Browning is the rust-like effect that comes about as a result of environmental contaminants. The condition is worse when you are living in areas with salty waters. When you install the film, you protect your car from these materials hence it lasts for a long time.

When getting the film installed, ensure that it’s installed by an expert as you don’t want it installed in a poor way that allows the contaminants to go through.

Protection from full discoloration: Your car is bound to undergo full discoloration when you go for years without properly maintaining it. The car will also be discolored permanently when you pour harmful materials on the paint.

While the film might not provide maximum protection against the chemicals, it will keep off some of the materials thus protecting the car from the discoloration.

Protection against yellowing/fading: When you regularly park your car outside, it’s bound to fade. By installing the car bodywork film, you prevent the harmful UV rays from getting into the body of the car thus protecting it from damage.

Easier cleaning: Did you know that when you install the car film you make it easy to clean it? With the film in place, you are able to easily clean off bird poop or sap leaving your car clean and beautiful to look at.

Paint protection film options

Did you know that you have many options when it comes to the films that you can go for? The films that you can go for include:

Suntek: The most identifying feature about the film is that its self-healing. This means that when there are scratches on the film, you can easily heal them. All you need to do is to pour hot water on the film and the scratches will vanish.

When it comes to installation, the film is easy to install. The only flaw is that it’s not very adhesive; therefore, it tends to come off especially when you keep on leaving your car under the sun for long periods of time.

3M Scotchgard: It’s popular for its longevity. When you install it, you are given a warranty of up to seven years. This gives you peace of mind as you know that it will last for a long time.

Unlike SunTek, the adhesive is aggressive and stays in place for a long time. As a result, you don’t have to keep on replacing it every few years.

While the film is clear on most paint colors, a few dark-colored car owners have reported that the film is too visible on their paint.

While the film is tough, experts have reported that it doesn’t apply well in cold weather. This leads to longer installation times.

Xpel ultimate: The film is loved by many as it’s nearly invisible when it’s properly installed on the car. It’s also easy to install and provides better aesthetics than 3M Scotchgard.

While the film is great, its main flaw is that it’s easy to remove. This means that in the event the film installer isn’t keen in their work and in mixing water and alcohol, the film will easily come off forcing you to reinstall it, after a few uses.

Tips to consider when using car films

When installing the films, you should ensure that they are installed by an expert. The last thing you want is having to reinstall the films after a few uses. Always check the qualifications of the clear car protection film installers Springfield and ensure that they are qualified and experienced enough.

When shopping for the film, go for the highest quality. Even if you might hire the most reputable contractor, there is no way the film will last for long if it’s of poor quality.

5 Things You Should Know About Granite Countertops

Granite countertops are one of the most popular countertop options in the market. Are you thinking about installing them in your kitchen or bathroom? There are plenty of things you should know about them. Some of these things include:

You have many options to choose from

Whether you are a minimalist, looking to give your house a modern look, or you want them for any other reason, there are plenty of countertop options for you for you to choose from. The natural stone surfaces come in different colors and patterns for you to choose from.

Due to the many options available for you, it can be a daunting task to choose the right material for your home. When you are choosing the right units, one of the most important factors you should consider is the design you want to create in your home. As a rule of thumb, you should go for materials that improve the overall design of your house.

If you aren’t sure of the right color, design, or style that is ideal for your house, you should get the input of an experienced professional.

Pay attention to the seams

While the countertops look great when you properly install them in your home, the seams can sometimes give them an ugly look. You don’t want this. For you to ensure that the countertops are as seamless as possible, you should hire the right countertop contractor.

The professional will help you with the inspection of the countertops, measuring of the space, cutting of the granite in order to fit your home and undertaking the installation so that the countertops look as great as possible.

A good contractor should be able to hide as many seams as possible, but in some cases, there are some that are unavoidable.

In addition to hiring an experienced contractor, you also should ensure that the contractor has the right machines for the work. For example, the contractor should have a suction-automated machine that aids in holding the granite in place thus ensuring that the existing seams are as unobstructive as much as possible.

Granite is breakable

It’s true that granite is a tough material, but this doesn’t mean that it’s unbreakable. This calls for you to be cautious of how you handle it. When you hit the surfaces, they can easily get dinged, chipped, and even scuffed.

The cool thing is that you can protect the surfaces from getting damaged. Some of the best ways of doing so is by polishing, sealing, and cleaning them regularly. When it comes to the kitchen countertops, carefully place the pots on them.

For the bathroom countertops, avoid placing any materials that can scratch them.

When repairing the cabinets or undertaking any other home improvement project, avoid placing hammers and other tools on them as they can get broken. Find a towel or any other material that will provide the much-needed protection.

If you have installed the countertops in a restaurant or any other place of work, educate the people on how to properly handle them. The last thing you want is your favorite pieces getting damaged.

The countertops aren’t all-purpose workspaces

As mentioned, granite is a tough material and holds up very well in a wide range of uses. While this is the case, it doesn’t mean that you can use it in any way that you please. You can roll dough on the units, but remember to use a chopping board when cutting the vegetables.

Although, they are tough and durable, you should avoid placing hot pans straight from the stove or oven. This is because the extreme temperature changes can damage the finish of the countertops giving them an ugly look.

When cooking, always use a trivet or potholder.

You need to maintain the countertops

For the countertops to look great and also last for a long time, you need to take good care of them. The cool thing is that it’s extremely easy to maintain the countertops. The only thing you need to do is to polish, seal, and clean the pieces and you will be good to go.

Of course, for you to get the most from the units, you need to ensure that they are of high quality. This calls for you to buy them from reputable granite companies Raleigh.

Appliance Repair: Garbage Disposal Myths

While garbage disposals have been around for a long time, appliance repair professionals observe that they are marred by a lot of myths. Here are some of the most common myths and how to go about them:

The units are bad for the environment

While the units use electricity and water, they greatly promote the betterment of the environment. They do this by preventing food scraps from going into the landfill. This means that the food doesn’t decompose releasing greenhouse gases that lead to more damage to the environment.

When you put the food pieces down the garbage disposal, the unit grinds them into small particles that are small enough to be processed through the water treatment system. From this evidence, you can tell the units do more good to the environment than destroying it.

You can put anything in the garbage disposal

While the unit is designed to grind the food into small pieces, it doesn’t mean that you should grind any food that you come across. This is because putting any food down the unit you will be putting it at the risk of clogging up.

Repair professionals recommend that you avoid putting anything down the garbage disposal if you can’t chew it. This calls for you to avoid allowing bones and tendons down the system. You also should avoid putting fibrous foods such as celery, corn husks, and asparagus down the system.

The threads from these foods can lodge between the teeth of the garbage disposal preventing it from working as well as its supposed to.

Putting the wrong things down the garbage disposal puts it at the risk of clogging up. When you are unable to get rid of the clog by yourself, you have to hire an expensive repair professional leading to loss of money on your side.

The clogs can also create chaos in your home when you are unable to get rid of the food.

Garbage disposals have blades

You might have heard that garbage disposals have blades that cut up the food pieces into small pieces. Instead of blades, garbage disposals have small teeth that spin at high speeds and grind the food in the process.

The system works like a cheese grater, and there are no blades involved. While this is the case, you shouldn’t put your fingers in the system as you will get cut.

Since there are no blades, you also can’t sharpen them, right? Many people have the notion that putting ice down the garbage disposal they will sharpen the blades, but this isn’t the case. Others use egg shells to sharpen the blades. Again, there are no blades!

In fact, use of shells has been shown to lead to clogging of the garbage disposal as the shell’s membrane layers get entangled in the impellers. The ground-up shell particles also gets into the drain pipes creating more clogs.

You should use hot water when running the garbage disposal

Hot water comes in handy at dissolving grease and leaving the garbage disposal in top shape, but you should be cautious when using it. You can use it when cleaning the system, but avoid using it when running the unit.

This is because the hot water melts the fat as it enters the pipe system. When the water cools, the fat might stick to the drain pipes causing a clog.

For you to be on the safe side, you should use cold water at all times. This way you don’t melt the fat thus you don’t have to worry about clogging the insides of your drain pipes.

Lemons clean the garbage disposal

You must have across people telling you that by putting lemons down the garbage disposal you will keep it clean. While the lemons aid in making the unit smell fresh for some time, it doesn’t get any cleaner.

You should note that the citric acid in the garbage disposal isn’t strong enough to disinfect or remove the stale food from the system. The only thing it can do is to mask the foul odors of the food.

For you to keep the garbage disposal clean, commercial appliance repair Springfield professionals recommend that you go the traditional way of using soap and a lot of water.

Tree Cutting Services: Tips To Consider When Cutting A Tree

Are you looking to bring down a tree? You can cut it by yourself or hire tree cutting services providers. For you to effectively bring down a tree, you need to consider a number of tips that include:

Have a reason why you are bringing down the tree

Why do you want to cut the tree? You can it because of many reasons. the most common ones being:

  • The tree is leaning in one direction or another
  • The tree has dead or broken branches
  • The tree is sick
  • The tree is too old
  • The tree is too large and a threat to you and your family

You should note that it doesn’t mean that you should always have to bring down the tree if it has all of these signs. Before you pull the trigger, ask a professional to help you with the inspection and its only after the expert has confirmed that you should bring it down, that you should go ahead and do it.

Keep safety first

Many things can go wrong when you are cutting down the tree. For you to have peace of mind when bringing down the tree, keep your safety as your priority. Before you do anything, ask yourself whether you are ready to face the project safely.

Ensure that by felling the tree you won’t cause any harm to yourself or other people around you. The tree also shouldn’t cause harm to nearby trees and structures.

One of the ways of protecting yourself is having the necessary protective tools and supplies. The equipment you should have include:

  • Gloves
  • Eye protection
  • Hard hat
  • Hearing protection
  • Wedges
  • First aid kit
  • Plum line
  • Saw gas and bar oil
  • Single blade ax
  • Chain
  • Chainsaw

Many people go for any chainsaw that they come across, but this shouldn’t be the case. As rule of thumb, ensure that the chainsaw you are using is working properly and in good condition.

Ensure that the chain brake is working, the saw dogs are properly attached to the saw housing, and the bar is long enough. For ideal results, ensure that the bar is as long as the diameter of the tree you are cutting.

Ensure that the chain is properly sharpened. If the chainsaw is dull, damaged, or isn’t cutting straight, it won’t give you the results you are looking for.

Have a plan

Simply because you have the necessary safety tools doesn’t mean that you should jump ahead and start cutting the tree. You need to have a plan of how you are going to bring down the tree.

You need to know how you are going to cut the tree so that it falls in a certain direction. This calls for you to ensure that the tree is angled 30-45 degrees to either side of the skid trail.

You should keep an eye out for widow makers. These are tree fragments that can fall on people or property causing serious injury, damage or even death.

Pay attention to the weather. Are there strong winds? Avoid cutting down the tree. Also, avoid cutting the tree if there is fog or smog. Steep or uneven slope can also quickly turn tree cutting into a dangerous situation; therefore, you should avoid cutting it in such a situation.

Follow the right tree cutting steps

You should follow the right steps for you to effectively bring down the tree. The steps to follow include:

Sound it out: Here you should knock against the tree with an ax. If it sounds hollow, it’s most likely dead or dying. If it sounds solid, it’s live wood and it will be difficult to cut. You should knock it at different points and heights. If you are lucky, you will spot an area that will make it easy for you to cut down the tree.

Make the necessary cuts: The cuts that you can make are: horizontal, wedge, or back. The cut that you make determines the direction the tree will fall. If you have never cut the tree before, you should research about it.

For you to be safe, ask tree removal companies Chevy Chase to help you out. Remember, things can go wrong; therefore, it’s always wise to have an escape route. Always keep the route clear.

6 Things You Should Know About Granite Countertops

Are you thinking about installing kitchen countertops? Some of the best pieces that you should think about are granite countertops. To help you in making the decision as whether you should go for them, here are a few things you should know:

Are they durable?

You don’t want units that you will have to replace after a short time, do you? The good thing is that you don’t have to worry about durability. This is because as long as you take good care of your pieces, these will go a long way.

The countertops come with features that allow them to last for a long time. Granite is a hard material that is resistant to cuts and scratches. The material is so hard that it leaves the steel knives dull and damaged.

Granite is also resistant to heat; therefore, you can place your hot pans on it when you are cooking without worrying about damaging it.

While this is the case, it’s recommended that you use a trivet when you are placing hot substances on it for a long time. Since granite is dense, the heat tends to spread to the entire countertop which might scald you in the process. In some cases, when the heat is excessive, the countertop can crack.

Is it beautiful?

Being one of the most popular countertop materials in the world, you can bet that it’s beautiful. Some of the people that use it reckon that it’s one of the marvelous creations of mother nature. The countertop comes in many shades that are stunning and aesthetically pleasing to look at.

The countertop allows you to create any look you want in your kitchen. Do you want it shiny and polished? Do you want it honed and natural looking? It all depends on you. You only need to choose the look that you want.

What are the color options?

Since you are dealing with a natural stone, you are limited in the colors you can choose from. This means that you won’t find slabs with a lot of solid patterns or bright colors. This doesn’t mean that they don’t exist, they just aren’t many.

When you are buying the countertops, be on the lookout for a wide range of colors and patterns within the same color of the stone.

You should note that many exotic types of granite have huge flowing waves. This means that when you order a sample from the manufacturing company, you might not find the exact same pieces while the countertop might have been obtained from the same slab.

Do you need to seal the countertops?

Yes, you have to. This is because the countertops are porous thus you need to seal them to protect them from absorbing liquids. You might have the impression that being porous is a bad thing for a countertop, but this isn’t the case.

Unless the liquids are colored, when the countertops absorb them, the liquids eventually evaporate. Most of the countertop installers will seal the countertops before they install them. For you to get the most from the sealing, ensure that you invest in high-quality sealing products.

Do you need to repair the countertops?

When you take good care of your pieces, it’s rare that they will develop problems that require you to fix. However, in the event the pieces crack or chip, you have to fix the units as soon as possible.

All you need to do is to contact a fabricator who will inspect the units and fix the problematic areas. Most of the contractors will use color matched epoxies to fill the voids making the chips and cracks virtually invisible. If there aren’t any epoxies available, you should consider using superglue to fill a chip.

For you to avoid damaging your pieces you should be cautious when using heavy cast iron pans. As rule of thumb, never place them on the edges of the countertops as they are likely to chip off. You also risk damaging your pans when they fall to the ground. When cooking, always place your pans at the center.

How easy is it to maintain the countertops?

The countertops are considered as low maintenance pieces. After you have hired the right granite installers NC and sealed the pieces, you don’t need to do anything else to the pieces. Maybe all you need to do is to apply the sealing material once every 10 years.

Commercial Garbage Disposal Repair And Maintenance Tips

Do you have a garbage disposal? There are a number of things you should know about it. Here are some of these things as given by commercial garbage disposal repair professionals:

Always do the right things

Just like any other appliance, if you mistreat your unit, it’s bound to develop problems. Some of the things you should do to keep your unit in top shape include:

Keep the garbage disposal clean: You can do this by pouring a little dish soap inside the unit and let it run for a few minutes.

Run the appliance regularly: Just like any other unit, by keeping the unit running you prevent rust and corrosion. It also keeps all the parts moving thus preventing obstructions from accumulating.

Grind food with a strong flow of cold water: The reason you should use cold water instead of hot is to prevent grease and oils that get into the unit from melting and clogging the unit. The cold water solidifies the oils and grease so that they are chopped up before they reach the trap.

Grind hard materials: You should regularly grind hard materials such as fish bones, chicken bones, small fruit pits, and others. When you grind the materials, you create a scouring action inside the grind chamber that cleans the garbage disposal walls.

Always cut large items into small ones: Before you put the items in the garbage disposal, always cut them into small pieces. This comes in handy in preventing the unit from clogging up.

Avoid mistreating your appliance

Just as there are a number of things you can do to keep your unit in top shape, there are equally a number of things you can do that will hurt your appliance. Some of the things you should avoid doing include:

  • Grinding plastic, glass, metal, or even papers
  • Grinding cigarette butts or combustible materials
  • Pouring grease, oil, or fat into the garbage disposal. When you pour the grease, it will slowly accumulate and prevent the garbage disposal from grinding the food materials. As a result, you will clog the drains.
  • Grinding extremely fibrous materials such as corn husks, artichokes, onion, skins, and celery stalks. The fibers from these materials are bound to tangle and jam the garbage disposal motor and even block the drains.
  • Turning off the garbage disposal before the grinding is completed. Doing this has been shown to lead to damage to the appliance. The right way of going about it is waiting for the grinding to complete after which you should turn off the appliance.
  • You should then let the water run for at least 15 seconds after which you should flush out the remaining particles. It’s after this that you should turn off the water.
  • Putting expandable foods in the unit. Foods such as pasta and rice expand when they get into contact with water. When they do so inside your unit, they are bound to jam and clog the garbage disposal.
  • Cleaning the garbage disposal with harsh chemicals. Harsh chemicals are not only risky for you, they also cause harm to your blades and pipes. For you to protect yourself and your unit, never use the chemicals in your unit.

Aim to keep nasty smells out of your unit

No one likes a bad smelling appliance. Unfortunately, due to the presence of food materials, it’s common for the garbage disposal to produce bad smells. The cool thing is that there are a number of things you can do to keep your appliance smelling great. Some of these things include:

Tossing an orange or lemon in the garbage disposal. When you periodically toss lemons or oranges in the disposal, the oils and juice from the fruits and peels will naturally clean the walls inside the garbage disposal creating a fresh and long lasting scent.

You can’t find the fruits? Freeze vinegar in ice cube trays and run them down the garbage disposal. These materials will kill the odor-causing bacteria thus keeping your unit smelling great. Commercial appliances repair Alexandria professionals report that vinegar also keeps the blades sharp thus increasing the efficiency of the unit.

Are you experiencing stubborn odors? You should pour baking soda down your drain and let it set for a few hours after which you should run cold water.